7/32 Concrete Drill Bit

▲
7/32 Concrete Drill Bit
7/32 Concrete Drill Bit
7/32 Concrete Drill Bit
7/32 Concrete Drill Bit
▼
default image
$4.56
In Stock
add to my order
   Quick Content Anchors
DESCRIPTION

The 7/32 Concrete Drill Bit is designed for PanelMate storm panel anchoring and concrete installation applications. This masonry drill bit is used to drill the required 7/32" pilot hole for Male and Female PanelMate anchors in concrete and masonry substrates.

The PanelMate combination drilling system is designed to drill the pilot hole and countersink the anchor components for proper installation. The bit is suitable for applications involving hurricane hardware, storm shutters, concrete, block, and masonry anchoring systems.

FEATURES

  • Bit for PanelMate installation systems
  • 7/32" drill diameter for PanelMate anchors
  • 6" overall length
  • Designed for drilling pilot holes in concrete and masonry
  • Suitable for Male and Female PanelMate anchor applications
  • Ideal for storm panel and hurricane hardware installations
  • Compatible with PanelMate anchoring systems
  • Suitable for concrete, block, and masonry applications
SPECIFICATIONS

  • Bit Diameter: 7/32"
  • Bit Length: 6"
  • Bit Type: Masonry Drill Bit
  • Application: PanelMate Anchor Installation
  • Primary Use: Drilling 7/32" pilot holes
  • Compatible Anchors: Male and Female PanelMate Anchors
  • Applications: Concrete, block, masonry, storm shutters, and hurricane hardware
INCLUDED

  • (1) 7/32 Concrete Drill Bit
PRODUCT MEDIA


QB ID: 21R600DBM

Reviews

Write A Review

FAQ

1.When should I start preparing?


Start now
—don’t wait for a storm.The biggest mistake people make is waiting until a storm is already on the radar—by then, supplies are limited and shipping delays are common.

2.How long do power outages usually last?

  • Minor storms: hours to 1–2 days

  • Major hurricanes: several days to weeks




  • Power restoration depends on:
  • Damage severity

  • Road access

  • Priority areas (hospitals first)
  • 3.What is the difference between BOCA vs Non-BOCA?

    "BOCA" refers to the older Building Officials and Code Administrators code that many jurisdictions used before Florida consolidated everything into the statewide Florida Building Code (FBC) in 2002. BOCA vs. Non-BOCA refers primarily to the spacing and quantity of mounting hardware.

    • BOCA: Fasteners/hardware sets are spaced no more than 6 inches apart. This uses roughly twice as much hardware and provides more attachment points.
    • Non-BOCA / Florida Building Code option: Hardware sets may be spaced up to 12 inches apart, so fewer sets are required.

    4.What is hurricane season and when does it occur?

    Hurricane season is the time of year when tropical storms and hurricanes are most likely to form and hit the U.S. It typically runs from June 1 through November 30, with peak activity from August to October.

    5.How far inland can hurricanes cause damage?

    Hurricanes can cause wind and flooding damage hundreds of miles inland.

    6.How do hurricanes form?

    Hurricanes form when warm ocean water, moist air, and low wind shear combine to create a rotating storm system that strengthens over time.

    7.What is the difference between a tropical storm and a hurricane?

    A tropical storm has winds between 39–73 mph, while a hurricane has winds of 74 mph or higher.

    8.What is the Saffir-Simpson Hurricane Scale?

    It’s a classification system (Category 1–5) based on wind speed used to estimate potential damage.

    9.What is the eye of a hurricane?

    The eye is the calm center of the storm, surrounded by the most dangerous winds in the eyewall.

    10.What supplies sell out fastest before a hurricane?

    Most common shortages include: non-perishable food, water, batteries, generators, shutters, plywood, screws, and fuel.